Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 202 Firecrest Carbon Clincher Wheels
$949.99 - $1,150.00
The Zipp 202 Firecrest Carbon Clincher retains a classic 32mm rim depth, but with a sturdier 25.4mm rim width for all-around use. This legendary climber's companion weighs just 1,450g, and features Sapim CX Sprint spokes to optimize torsional and lateral stiffness. Laced to the maintenance-free Zipp 77/177 hubset, you can count on best-in-class durability no matter where you decide to ride. Confident stopping power comes from a combination of heat-resistant resin used in the 202's construction and Tangente Platinum Pro Evoke brake pads that provide all-conditions reliability. Zipp includes an integrated valve extender with valve-core wrench, rim tape, and quick release.
Zipp 202 NSW Carbon Clincher Tubeless Cognition Disc-Brake Front Wheel
$1,399.99
Engineered to be the fastest accelerating carbon clincher Zipp has ever made, the 202 NSW Carbon Clincher Tubeless Disc-brake flies up the toughest climbs and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, Zipp built the 202 NSW to deliver the lowest aerodynamic drag available for a tubeless rim of this depth for speed everywhere else. And, the Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs. - Superior modulation and stopping power of disc brakes - 202 NSW rolls efficiently whether you are pedaling or coasting - Zipp’s ImPress graphics technology which prints graphics directly on the wheel, to help allow the dimples to do what they were designed to do – control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 202 NSW Carbon Clincher Tubeless Cognition Disc-Brake Rear Wheel
$1,799.99
Engineered to be the fastest accelerating carbon clincher Zipp has ever made, the 202 NSW Carbon Clincher Tubeless Disc-brake flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, we built 202 NSW to deliver the lowest aerodynamic drag available for a tubeless rim of this depth for speed everywhere else. - Superior modulation and stopping power of disc brakes - 202 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 202 NSW Carbon Clincher Wheels
$1,349.99 - $1,750.00
When Zipp gave their top engineers in The Nest advanced development lab the task of shedding more weight from their lightest carbon clincher wheelset, the 202 Firecrest, while also improving rolling friction, aerodynamics, and braking, it was a very tall order. When they asked them to do all of this without sacrificing durability, it looked like an impossibility. But the NSW advanced development team delivered on every request and built the ultimate climbing wheelset, a climbing wheelset strong enough to use on every ride. Engineered to be the fastest accelerating carbon clincher Zipp has ever made, 202 NSW flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, they built the 202 NSW to deliver the lowest aerodynamic drag available for a rim of this depth for speed everywhere else. In order for a climbing wheelset to be world beating it has to do more than simply deliver low weight; it has to deliver uncompromising performance on every level. This is why Zipp engineers in The Nest chose to enhance the world’s fastest climbing carbon clincher, the 202 Firecrest. With a new lighter carbon fiber layup for the 32mm deep 202 NSW, they’ve dropped weight where it matters most, at the outer edge of the wheel, while maintaining the durability and lateral stiffness that Firecrest is famous for. Then they reduced aerodynamic drag with ABLC Sawtooth technology and used ImPress graphics to ensure that nothing stood between the air flowing over the rim and the dimples made to smooth that flow. Knowing that there is no benefit to a wheelset that climbs fast and descends slow, NSW engineers incorporated their Showstopper brake track for the most confidence inspiring rim braking performance available, whether the road is wet or dry. To further improve the wheelset’s rolling efficiency, the 202 NSW rim is laced to their groundbreaking Cognition hubset. Built around their Axial Clutch freehub technology, the Cognition rear hub is engineered to maintain speed when coasting by disengaging the ratchet mechanism. This technology enables the Cognition rear hub to deliver far less rolling friction than wheels using conventional freehubs—a real advantage when fighting through rolling foothills or when spun out on long descents. Engineered for speed when approaching, ascending, traversing, and descending the world’s toughest mountain roads, the Zipp 202 NSW is a wheelset that can only come from one place, The Nest, where the world’s fastest wheels are made.
Zipp 30 Course Disc Brake Front Wheel (Clincher)
$444.99
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Disc Brake Rear Wheel (Clincher)
$554.99
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Rim-brake Clincher
$444.99 - $555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Zipp 302 Carbon Clincher 700c Rear
$844.99
With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever. The 302’s smooth carbon rim is hand assembled to Zipp’s new 76/176 hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less traveled, yet light enough to tackle the steepest grades. The 76/176 hubset’s axle end caps and rear freehub can be removed without tools for quick and easy cleaning and lubrication. Additionally the J-bend spoke design allows for easy sourcing of replacement spokes. And like all of Zipp's carbon clinchers, the rim bed of the 302 is designed to make installing and removing tires fast and easy. Experience Zipp speed with the 302. Each 302 Rim-Brake Wheel Includes: - Zipp valve extenders - Zipp rim tape - Zipp Tangente quick-release skewers
Zipp 302 Carbon Clincher Disc Brake 700c Front
$654.99
With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever. To keep the wheels light and easy to service Zipp used a center locking brake rotor mounting interface on their 76D/176D hubs. The 76D/176D hubset also features replaceable axle end caps for thru-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of Zipp's carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible. The 302’s smooth carbon rim is hand assembled to Zipp’s new 76D/176D hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less traveled, yet light enough to tackle the steepest grades. Experience Zipp speed with the 302 Disc-Brake. Each 302 Disc-Brake Wheel Includes: - Zipp valve extenders - Zipp rim tape
Zipp 302 Carbon Clincher Disc Brake 700c Rear
$844.99
With a 45mm deep rim optimized for low aerodynamic drag and predictable handling in all riding conditions. The 302 achieves this at a price point that makes Zipp carbon quality and performance more attainable than ever. The 302’s Indianapolis-made smooth carbon rim is mated to Zipp's new J-bend hubs to assemble a wheel that is both fast and reliable. Assembled by hand in Indianapolis with 24 Belgian Sapim CX-Sprint spokes up front and 24 out back, the 302 is equally suited to training rides or duking it out at your local criterium series. - Rim shape optimized for low aerodynamic drag and predictable handling in all riding conditions - Carbon Clincher - J-bend hubset - Thru-axle compatible - XDR Driver Body Compatible - Center lock - disc-brake only
Zipp 303 Firecrest Carbon Clincher Rim-Brake Front Wheel
$999.99
If perfection is the standard, then the 303 Firecrest Carbon Clincher wheelset delivers everything you could ask for, including a heritage forged in the Spring Classics. At the center of the 303 Firecrest Carbon Clincher is the 77/177 hubset, an innovation that results in improved aero performance, stiffness, braking, durability, simplicity, and versatility. The 303 Firecrest is light enough to climb up the steepest gradients with ease as a go-to all-around wheelset. - Improved 45mm rim profile – fast, stable, and versatile - ABLC Sawtooth dimple design helps manage airflow around the rim for a faster, more stable wheel - Industry leading Showstopper brake track: powerful and consistent braking, even on wet terrain - 77/177 hubset, reliable & durable, proven in the Spring Classics, no pre-load adjustment required - Sapim spokes & nipples - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 303 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,199.99
If perfection is the standard, then the 303 Firecrest Carbon Clincher wheelset delivers everything you could ask for, including a heritage forged in the Spring Classics. At the center of the 303 Firecrest Carbon Clincher is the 77/177 hubset, an innovation that results in improved aero performance, stiffness, braking, durability, simplicity, and versatility. The 303 Firecrest is light enough to climb up the steepest gradients with ease as a go-to all-around wheelset. - Improved 45mm rim profile – fast, stable, and versatile - ABLC Sawtooth dimple design helps manage airflow around the rim for a faster, more stable wheel - Industry leading Showstopper brake track: powerful and consistent braking, even on wet terrain - 77/177 hubset, reliable & durable, proven in the Spring Classics, no pre-load adjustment required - XDR driver body available for 1x setups - Sapim spokes & nipples - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,049.99 - $1,149.99
The 303 brings a lot to the table, including heritage proven in the world's hardest races. At the center of the wheelset is Zipp's 77/177 hubset, which results in improved stiffness, durability, simplicity and versatility. The carbon wheel that helped pioneer the Firecrest rim platform for improved aerodynamics and crosswind stability also features the unspoken durability that has repeatedly won Paris Roubaix and the Tour of Flanders - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve - 303 Firecrest Carbon Clincher Tubeless Disc Brake total wheelset weight is 1645 grams
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,249.99 - $1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 303 Firecrest Carbon Tubeless Disc Brake Rear
$974.99
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 Firecrest Tubeless Disc Brake Front
$924.99
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 NSW Carbon Clincher Tubeless Cognition Rim-Brake Rear Wheel
$1,799.99
Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry’s best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no ‘race day only’ wheelset to be tucked away in a wheel bag until a race number is pinned to the rider’s jersey. It’s built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world’s fastest riders. - Tubeless - COGNITION hubset - Axial Clutch technology - ABLC SawTooth - Showstopper - Faster, more stable AeroBalance rim profile - Handcrafted in the USA
Zipp 303 NSW Carbon Clincher Tubeless Rim-Brake Front Wheel
$1,349.99
Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry’s best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no ‘race day only’ wheelset to be tucked away in a wheel bag until a race number is pinned to the rider’s jersey. It’s built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world’s fastest riders. - Tubeless - COGNITION hubset - Axial Clutch technology - ABLC SawTooth - Showstopper - Faster, more stable AeroBalance rim profile - Handcrafted in the USA
Zipp 303 S Tubeless Disc Brake 700c Front
$625.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 303 S Tubeless Disc Brake 700c Rear
$675.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Front
$949.99
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Rear
$1,049.99
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 404 Firecrest Carbon Clincher 77 Rim-Brake Front Wheel
$999.99
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved stiffness, durability, simplicity, and versatility. - Firecrest rim Technology provides world-class handling and stability - 77/177 hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 404 Firecrest Carbon Clincher Disc Brake Wheel
$824.99 - $1,300.00 $1,099.99 - $1,300.00 Up to 25% Off
Road bikes are ever evolving and ever inspiring. The Zipp 404 Firecrest Carbon Clincher Disc brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of their most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. Zipp’s 404 Firecrest Carbon Clincher Disc brake is all about road riding and racing. In use at the highest levels of professional peloton, disc brakes are poised for growth in road riding and racing and triathlon. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation. All of that, combined with the performance of disc braking, make the 404 Firecrest Disc-brake an ideal choice for today’s style of road riding and gran fondos with long descents, super technical courses and varied road surfaces. Zipp’s expansion of its lineup of disc-brake wheelsets is at the forefront of a technical renaissance of road cycling. Zipp initially developed its disc-brake wheelsets at more shallow rim depths with the 303 and then 202 Firecrest Disc brake for use in cyclocross, gravel and mixed-surface road riding. Now, the era of road disc braking has arrived. Firecrest technology, with rims that maintain a near-constant width almost all the way to the spoke bed, is the first aero profile that effectively controls airflow around the back half of the wheel. Firecrest wheels offer stable, predictable handling at every wind angle by moving the center of pressure—what they call aero balance—the focal point of side forces on the rim—to its optimal location near the steering axis. A wider rim built using a proprietary resin system and manufacturing process, increases lateral stiffness for sprinting and cornering yet offers greater vertical compliance for more control, comfort, and durability on rough surfaces. At the center of the 404 Firecrest Disc brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. The XDR Driver body option allows for expanded cassette ranges including a 10-42. About the 77/177D hubset: - Bearing preload precision set—that means no pre-load adjustment is needed. - Improved bearing protection and sealant. - Includes Zipp Tangente quick-release skewers with a wider more ergonomic handle to provide more leverage for opening and closing. When closed, the lever contours neatly with the frame. - Thru-axle compatible. Comes with thru-axle end caps that can be swapped by hand: - Front: 12x100mm & 15x100mm - Rear: 12x135mm & 12x142mm - Proprietary flange geometry and spoke hole attachment pattern with Sapim CX-Ray spokes to optimize torsional and lateral stiffness without sacrificing weight or robustness. The 404 Firecrest Disc-brake comes with a standard 10/11 speed driver body for SRAM/Shimano or for Campagnolo, allowing you to run a wide range of cassettes. For those looking for a wider gear range, or tackling especially extreme terrain, a SRAM XDR driver body for 177D (sold separately) is easily installed to allow for more cassette options. A 1.85mm spacer is included with the XD driver body and is required for use on the 177D hub. XDR driver body compatible with 11-speed cassettes only. - Each wheel includes 2 sets of Zipp thru-axle end caps, 1 Zipp Tangente quick release, 1 Zipp rim tape 700c x 20mm and 1 Zipp core valve extension per wheel.
Zipp 404 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,199.99 - $1,200.99
If you had to choose just one wheel, the 404 Firecrest Carbon Clincher should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability, bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - Handcrafted in the USA
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,149.99
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions it's the all-around performer and standard by which all aero wheels are measured. At the center of the wheelset is Zipp's 77/177 hubset, an innovation that results in improved stiffness, durability, simplicity and versatility - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,349.99
Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Front Wheel
$1,399.99
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$1,799.99
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Tubeless Disc Brake Front
$1,399.99
The Zipp 404 NSW Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the Cognition disc-brake hubset for increased durability and less drag. This wheel, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance while retaining compatibility with tubeless and traditional clinchers. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 404 NSW Carbon Tubeless Disc Brake Rear
$1,799.99
The Zipp 404 NSW Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the Cognition disc-brake hubset for increased durability and less drag. This wheel, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance while retaining compatibility with tubeless and traditional clinchers. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Cognition DB hubset with Axial Clutch technology provides reduced drag when coasting - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 454 NSW Carbon Clincher Rim-Brake Front Wheel
$1,799.99
The 454 NSW delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels. Its undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition hubset - ImPress graphics - HexFin ABLC dimple pattern - Showstopper brake track - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 454 NSW Carbon Clincher Rim-Brake Rear Wheel
$2,199.99
The 454 NSW delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels. Its undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition hubset - ImPress graphics - HexFin ABLC dimple pattern - Showstopper brake track - Carbon Clincher - AeroBalance - Handcrafted in the USA
WeThePeople Supreme 22-inch Rear
$289.99
WeThePeople took their bombproof Supreme rear hub, added nylon hub guards, and then laced it up to their wide and rugged Logic rim to make one tough-as-nails wheel, ready to go, straight out of the box. - 14mm hollow/hardened heat treated Chromoly axle - 10mm female bolts - Includes nylon rim tape - Includes a second set of cones for use without hub guards - 9T driver, RHD
The Wheel Shop Alex DM-18/Shimano HB-M475 26-inch Front
$62.99 - $69.99
- Position Front - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano HB-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Fratelli FX 25 XXX/Factor DH 27.5-inch Front
$234.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 20mm TA - Hub Spacing 110mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Factor DH - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
The Wheel Shop Fratelli FX 25 XXX/Novatec D881SB 27.5-inch Front
$219.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 20mm TA - Hub Spacing 110mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D881SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
Syncros Silverton 1.0 Wheelset
$999.99 $1,299.99 23% Off
Our XC performance wheelset features our own carbon fiber 26mm hookless bead rim for efficient power transfer, speed and comfort on the trail. - High-end very responsive wheelset designed to deliver the best performance possible for any cross country rider - 26mm inner width - Carbon rim hookless bead construction - Syncros hubs - Boost standard - Tubeless ready
Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Stolen Rampage 20-inch Cassette Rear Wheel
$89.99 - $99.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces
Stolen Rampage 20-inch Rear Wheel
$89.99 - $149.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz
Stolen Rampage 22-inch Cassette Rear Wheel
$94.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H
Stan's NoTubes Arch S1
$288.99 - $289.99
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Crest MK3 29 Rear Wheels
$369.99
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Flow MK3 27.5 Rear Wheels
$369.99 - $370.99
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Sta-Tru 12-inch Front Wheel
$34.99
Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher
Sta-Tru 12-inch Rear Wheel
$32.99
Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm
Sta-Tru 16-inch Front Wheel
$34.99
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 16-inch - ISO Diameter: 305 / 16-inch - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher
Sta-Tru 16-inch Rear Wheel
$49.99
Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm
Sta-Tru 20-inch Double Wall Rear Wheel
$49.99 - $61.99
Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 20-inch Rear Wheel
$44.99 - $54.99
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 20-inch Steel Rim Front Wheel
$44.99
Sta Tru Front Wheel - Steel rim - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Rim Width (Internal): 24 mm - Tire Type: Clincher
Sta-Tru 24-inch Front Wheel
$49.99 - $62.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 24-inch Rear Wheel
$40.99 - $46.99
Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm
Sta-Tru 27-inch Front Wheel
$39.99 - $62.49
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - ISO Diameter: 630 / 27" - Tire Type: Clincher
Sta-Tru 27.5-inch Front Wheel
$55.99
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - ISO Diameter: 584 / 650b / 27.5" - Front Axle: QR x 100mm - Tire Type: Clincher
Sta-Tru 650B Rear Wheel
$46.99
Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 650b - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm
Specialized Roval Traverse Carbon 148 27.5-inch Wheelset
$1,199.99
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for tough, nimble wheels like our Traverse 27.5 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously nimble and playful 27.5 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge -Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1700g
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,199.99
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Specialized Stout XC 650b Rear
$150.00
650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - Stainless spokes won't rust, easing long-term maintenance.
Page 1 of 3 Next page