Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

American Classic Freehub Bodies
$109.99
Replacement freehub bodies for American Classic wheels.
Campagnolo Shamal Ultra Label Kit
$69.90
- Decals for replacement rims
Campagnolo Hub Rebuild/Upgrade Kit
$87.90 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
Challenge Tires Professional Rim Cement
$24.99
Challenge's Professional Rim Cement is just what you need to get your new set of tubies mounted up and ready to race. This product is only to be used on aluminum rims.
Chris King Front Adjustment Cone
$17.50
With Chris King, precision is everything. Shouldn't your hub bearing preload be precise, too? If the adjustment cone on your Chris King ISO hub is damaged, loose, or you've misplaced it, it's important to get a new one on there ASAP to keep that best-of-the-best hardware operating the way it should.
Chris King R45 Cassette Lockring
$37.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Chris King High Profile Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Includes one High Profile (HP) Adjustment Clamp - Fits all Chris King ISO/Disc Rear Hubs
Chris King Low Profile Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Fits Chris King ISO SD Front, and Classic Rear
Chris King ISO LD Gen 1, 100 x 15mm Front Axle
$73.50
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Large Diameter (LD) Axle for 15mm forks - Fits Chris King ISO LD Front Hubs (15mm and 20mm only) with serial numbers starting with 171 ONLY - Allows you to run a 15mm Axle on Chris King ISO LD Front Hubs - All axles require an adjusting clamp for installation
Chris King ISO SD 100 x 15mm Front Axle
$73.50
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Chris King ISO SD QR Front Axle
$73.50
Chris King never settles for anything but perfect, so you shouldn't either. This replacement axle replaces a damaged or worn axle on Small Diameter (SD) Chris King ISO front hubs designed to work with Quick Release skewered fork ends. To convert your ISO SD hub from a different axle standard to QR, you'll need this axle, along with the following parts: - ISO SD QR Front Axle End, Manufacturer's Part Number (MPN): PHB308 - 9mm Front Axle Adjustment Cone, MPN: PHB701
Chris King 135 x 10mm Rear Axle
$98.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 135x10mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
Chris King 135 x 12mm Rear Axle
$98.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
Chris King 142mm x 12mm Rear Axle
$98.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 142x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
Chris King XD Driveshell Conversion
$211.99
Chris King ISO XD Driveshell assembly conversion kit, no bearings.
Chris King XD Driveshell
$261.99
Chris King ISO XD Driveshell assembly, complete with bearings.
Chris King XD Driveshell Ceramic
$347.50
Chris King ISO XD Driveshell assembly, complete with ceramic bearings.
Continental Easy Tape HP Rim Strip
$10.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
Crank Brothers Front Endcaps Kit
$39.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
Crank Brothers Highline Double Wheel Bag
$89.99
A safe haven for your wheelset. - Soft protective wheel bag for safe transport of two wheels up to 29 inches. - Engineered for Crankbrothers by EVOC. - Durable, water resistant construction made from polyurethane coated 600D polyester - Internal divider keeps wheels protected from each other - Integrated pocket for stowing small items - Integrated axle protection - Integrated carry handles
Crank Brothers XD Driver Body
$89.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
DT Swiss Spoke Head Washer
$90.00
- Designed to stabilize 15g spokes in most hub flanges
Delta Axlerodz Bolt-On Skewers
$14.99
- Extra security against theft - 5mm hex CrMo axle
ENVE Brass Replacement Spoke Nipple
$0.50 - $14.56
ENVE brass replacement nipples fit perfectly into their molded spoke hole carbon fiber wheel systems.
ENVE Rim Tape
$7.99
Complement your Enve clincher rims with Enve Rim Tape. This tape provides protection for your tubes from the spoke holes and other edges of the tire bed.
ENVE Rim Strip
$8.00
Complement your Enve clincher rims with Enve Rim Strips. This tape provides protection for your tubes from the spoke holes and other edges of the tire bed.
ENVE Rim Strip
$8.00
Complement your ENVE clincher rims with ENVE Rim Strip. This strip provides protection for your tubes from the spoke holes and other edges of the tire bed. This is not tape for a tubeless setup.
ENVE Mountain Valve Stem
$8.99
These replaceable valves are for use tubeless-compatible Enve rims. Removable valve cores allow for easy injection of sealant.
ENVE Spoke Nipple
$10.40
Replacement nipples for installing spokes on ENVE carbon fiber cycling wheels. Rim, spoke, and hub won’t stay together on their own. These are the only nipples you should use on our wheels. - Material: Brass - ENVE nipples are required in order to keep your wheel warranty valid
ENVE Silca Valve Extenders
$28.99
SILCA valve stem extenders for tubular tires and tubes with removable valve core. ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm. - The 34mm set is optimized for the SES 3.4 and SES 3.4 Disc - The 45mm set is optimized for the SES 4.5 and SES 5.6 Disc - The 75mm set is optimized for the SES 7.8 and SES 7.8 Disc
Page 1 of 7 Next page