Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

All-City Cross Wizard Chainring Guard
$45.00
All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum
Campagnolo Record Ultra-Torque Crankset
$564.99 - $800.99
Campagnolo's incredible Record Ultra-Torque Crankset sports a unique, integrated spindle that joins the two sides of the crankset together via a toothed Hirth joint in the center. Campy's ultra-smooth bottom-bracket bearings are included and fit into outboard cups (sold separately). The aesthetically striking design provides incredible stiffness, while Campagnolo's standardized BCD (145/112mm) allows for multiple chainring sizes. Plus, the Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: double - Spindle interface: Campagnolo Ultra-Torque
Campagnolo H11 Crankset
$649.99 - $720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Super Record Carbon Crankset
$869.99 - $1,059.99
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
Cannondale Hollowgram Si Road Crankset
$799.99
Sprint-worthy stiffness meets climb-friendly weight in Cannondale's Hollowgram Si Road Crank Set. Cannondale's One Piece Integration 3D forging is the secret to keeping this aluminum crank feathery-light and incredibly stiff. Plus, it's finished off with FSA's high-performance chainrings for flawless 10-speed shifting.
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton Spider & Ring Assembly
$149.99
Easton spider and ring assemblies for CINCH cranks.
FSA 30mm Crank Bolt with M30 Cap
$13.99
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
MRP G3 Steel
$89.99
The G3 features MRP's patented integrated skid (US Patents RE 42,436 / 8,235,849 Patents Pending), which protects critical drivetrain components like the crank and chainring from damage and glides over rocks and obstacles. The skid and lower guide are combined into one solid structure. The skid and lower guide also feature our new attachment system, the Swingset. The Swingset system features a pivot at the forward skid mount that allows the skid to swing down for super easy crank and chainring installation. - Integrated skid protects chainrings and glides over rocks and obstacles - Includes standard pulley and new G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Nylon upper guide - Quietring wrap on the upper guide's tail mitigates chain-slap - 34-38t sizing - Stamped steel backplate - All install and adjustment operations possible with just a single 4mm HEX wrench. - 236g (ISCG-05)
MRP 1x V1
$99.95 - $99.99
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - Seat Tube mounted versions use first generation (V1) upper guides - CX model is only compatible with two-ring, road crank chainlines - BB mounted guides are only compatible with traditional, threaded BB systems
North Shore Billet 1x11 Spider for SRAM Cranks
$70.00
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
Origin8 Double/Triple Chainring Bolts
$6.99 - $19.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Origin8 Single Chainring Bolts
$7.99 - $20.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Race Face Cinch Nylon Preloader Crank Assembly
$2.49
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Race Face Chainring Bolt Pack
$2.99
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Race Face Cinch Nylon Preload Collar and Screw
$2.99
- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Race Face X-Type Spindle Spacer Kit FR/DH Cranks
$5.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Race Face 2008 and earlier Evolve XC Crank Bolt/Puller
$7.99
Race Face steel crank bolt/puller for 2008 and earlier Evolve XC cranks.
Race Face Evolve DH, Diabolus and pre-2012 Atlas FR Crank Bolt/Puller
$7.99
Race Face crank bolt/puller for Evolve DH, Diabolus, and pre-2012 Atlas FR cranksets.
Race Face 2005-2007 Deus and Cadence Crank Bolt/Puller
$8.99
Race Face aluminum crank bolt/puller for Deus and Cadence cranks.
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Race Face Atlas AM Crank Bolt/Puller
$8.99
Race Face steel crank bolt/puller for Atlas AM cranks.
Race Face Cinch Direct Mount Lockring
$8.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Race Face Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Aeffect CINCH Crank Arm Set
$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately
Race Face Turbine CINCH Crankarms
$199.99
- Intended for XC, Trail and Enduro use - Utilizes Race Face CINCH technology for interchangable spiders in 2X, 3X and direct mount chainring configurations, multiple spindle options and compatability across all relevant frame standards - Removable spider offers the ability to convert between existing chainring standards while remaining flexible for future developments - BB not included - BB Options: BB92, 68/73 BSA, 100mm BSA, PF30 - Includes 30mm spindle machined from 7050 aluminum alloy; replacement and additional spindle options also available
Page 1 of 5 Next page