Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Wahoo's ANT+ Speed/Cadence Sensor pairs with your iPhone to display your speed and cadence. • Requires an ANT+ receiver such as a Wahoo Key or Bike Case and iPhone for use (each sold separately) • Mounts on rear chain stay and uses spoke and crank magnets to track instantaneous bike speed and pedal rotations per minute • Water and shock proof: IPX7 Certified • Long-lasting, replaceable coin cell battery; no need for extra cables or recharging • Weight: 30 grams
ELEMNT BOLT is the first, fully aerodynamic GPS bike computer! Its patent-pending design creates an integrated system of computer and mount which results in a CFD (Computational Fluid Design) tested, highly aerodynamic system built to be on the front of your bicycle. Equipped with Bluetooth Smart and ANT+ dual-band technology, ELEMNT BOLT pairs seamlessly with all of your cycling sensors. It works with our free ELEMNT companion app which allows you to set up your data fields, customize profiles, track performance, and share ride data effortlessly—no more confusing menus! Plus, programmable LED QuickLook Indicators provide a quick way to see if you're on pace with important performance metrics like speed, heart rate, and power. Designed for performance and engineered for simplicity, the ELEMNT BOLT GPS bike computer helps make every second count. Lastly, the Bolt is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - Wahoo worked with world-renowned aerodynamic cycling expert Dimitris Katsanis to create a performance-driven bike computer. Designed as a system, the ELEMNT BOLT unit and integrated out-front mount becomes a CFD tested, highly aerodynamic system that is built to be on the front of your bicycle. - Includes a locking screw that riders can use to secure the computer to the mount. When utilized, the ELEMNT BOLT may remain on the bicycle for weigh-ins for UCI races. - A truly wireless bike computer with no plugin required (expect to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world. - 2.2" (56mm) diagonal display size that is larger than the leading competitor, so all your data and routes are easy to see. - There's a page for every element of your ride: a workout view with a complete look at performance metrics, a climbing view to track ascents in real-time, a map view to stay on course, live tracking, and more. All screens are fully customizable from within the ELEMNT Companion App. - Two sturdy and secure mounting options—aerodynamic out-front and stem—so that you can see your ride where you want.
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration
Our out front mount for Wahoo ELEMNT GPS bike computers is made from lightweight, durable plastic and is ideal for keeping your eyes on your data and the road. Fits 31.8mm round bars Weight: 0.7oz Works with ELEMNT, ELEMNT BOLT, and ELEMNT MINI (Note: BOLT will lose aerodynamic advantage with this mount).
Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. Fits any stem Weight: 0.2oz Works with ELEMNT, ELEMNT BOLT, and ELEMNT MINI (Note: BOLT loses aerodynamic advantage with this mount) Includes four (4) zip ties for mounting
Our heart rate strap is compatible with Wahoo TICKR heart rate monitors and the Wahoo Soft ANT+ heart rate monitor. The soft, elastic material minimizes the chance of chaffing and is easily hand washable. The two-snap connection is easy to get on and off, and the strap's adjustable length gives you a secure, reliable fit. Weight: 28 grams (1 ounce) Minimum length: 23 inches Maximum length: 48 inches
With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount. Weight: 0.1oz
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It's wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
The Wahoo RPM Speed mount is a silicone casing to secure your speed sensor to the front wheel hub of your bike. Includes one (1) mount.
Topeak designed their Weatherproof RideCase to provide the ultimate protection for your iPhone 6 or 6 Plus against water and dirt. The Weatherproof shield allows touchscreen access and is Touch ID compatible in wet and dry conditions. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. Includes a RideCase mount.
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit with the new Creston iC fully integrated cockpit for a minimalist and aero look, nestled into the distinctive V shape at the middle of the bar. - Fit's all Creston iC combos - Two screws mount underneath bar - Wahoo insert available separately
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount integrates seamlessly with the one-piece RR 1.0 Aero cockpit screwing in under the bar. - Mounts to RR.10 combos post MY17 - Alloy construction - Wahoo insert available separately
The Syncros Computer hanger provides perfect integration for your Garmin on the Syncros FL Stem with a higher position than our XR version.
Providing the perfect integrated position, the Syncros Computer hanger places your Garmin just in front of the stem when combined with the Syncros Foil Stem.
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit seamlessly with your Fraser iC cockpit with its negative stem angle. - Fits Fraser iC combo - Alloy construction angle adjust - Wahoo insert available separately
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit with the Hixon iC cockpit for perfect integration on your trail or Enduro setup. - Fits Hixon iC combo, XR & FL stems - Alloy construction angle adjust - Wahoo insert available separately
The new Syncros Computer hanger provides perfect integration for your Garmin on the Syncros RR Stem.
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount works in conjunction with our new RR iC stem as found on the new Scott Addict. - Designed for Syncros RR iC stem - Mounts into face plate - Integrated design - Fits all Garmin models - Wahoo inserts available
The Syncros Computer hanger provides perfect integration for your Garmin on the Syncros XR Stem. Simply replace the stem cap.
Dual band, Bluetooth, ANT +, heart rate sensor with strap. - Battery: 2032 Battery Life is 900+ hours - Sensor Range: 30 bpm - 230 bpm ANT+ and Bluetooth data sensor compatibility - Sweatproof - YES!
One third of the Stages Ecosystem, Stages Dash approaches the concept of cycling data differently by putting a premium on the metrics that help you meet your goals. Stages Dash ensures you will improve your performance with power by answering the question: I have a power meter, now what do I do next? Dash is the world’s most customizable head unit. Choice can be overwhelming, though, so we’ve readied Dash to go out of the box with pre-populated Activity Profiles to help you train with power, heart rate and even RPE. Stages Dash will tell you how to get better. With wirelessly synced workouts, on-screen explanations and automated on-the-bike prompts, riding Dash means you’ll never have to stick post-it notes to your top tube again. On the road or trail Stages Dash delivers all of your riding data to your fingertips through a high-contrast, high-resolution display. Faster learning means faster riding. Once a ride is over the unique Stages Ride file allows for quick workout analysis including a visual overlay of the prescribed workout and your actual ride data—Stages Link required*. When using Stages Link, the system will alert you to changes in fitness (e.g., Threshold Power or Threshold Heart Rate) to keep you on top of your performance. *Basic Stages Link management and analytic software are included gratis, with the option to upgrade to a powerful full-access version that offers deep yet simple to understand analytics plus access to training plans and the revolutionary Link training plan builder. - 2.7-inch LCD display with 240X400 resolution, and anti-glare coating. - Fully weatherproof with a IXP7 water resistance rating - Aluminum chassis and mount with ability to reorient to landscape and portrait views - 25-30 hour battery run time with micro-USB charging - ANT+ and Bluetooth data sensor compatibility - Wired or wireless data transfer to Stages Link - Works seamlessly with 3rd-party power meters and data analysis sites - Push notification for phone alert - GPS and GLONASS satellite navigation integration - Barometric Altimeter - Machined aluminum Out-Front mount for 31.8mm bars - Dash soft case - Micro USB cable - Dash leash - Quick Start guide - Lifetime access to Stages Link's Dash manager services, including push-pull data brokering - Bluetooth: Power, heart rate, speed, cadence - ANT+: Power, heart rate, speed, cadence - Phone: Android and iPhone
$729.99 - $999.99
The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Page 1 of 8 Next page